1) Tape casting
2) Cutting
3) Punching
4) Via Hole Filling
5) Screen Printing
6) Lamination
7) Scribing
8) Shaping
9) Cofining
10) Ni/Au Plating
11) Filter Capacitor/ Balun Inductor
Others

Tape casting

Back to Top

Cutting

Back to Top

Punching

Green Sheet Punching Machine

Application
This is an automatic through-hole punching machine for green sheets (ceramic sheets before sintering).
Green sheets piled in the entry section are fed to the punching stage and fed out onto the dedicated
tray after being punched.

Features
Multiple punching with compact die design can save much die cost compared with a conventional
design that uses single punching with large one-body dies.

Specification
Work material: Ceramic sheet before sintering
Work dimension: 259 mm x 308 mm x 0.1 to 1.0 mm
Press specification: 3,000 kg Hydraulic press
Inspection: Hole dimension and total area
Capacity: 16 sec/sheet (4-row punching)
Overall size: Line length: 7,000 mm

Back to Top

Via Hole Filling

Back to Top

Screen Printing

Automatic Positioning Machine

Back to Top

Lamination

Green Sheet Laminator

Application
This is a pressure-bonding machine for ceramic green sheets. Green sheets are bonded
by pressure and heat.

Features
Green sheets dried and preheated in the drying device attached to the press are then
heat-pressed by a press traveling over the green sheets.

Specification
Throughput: 500-blanks/hr. min.
Press capacity: 15 ton x 2 max.
Overall size: 1,500 mm (W) x 6,800 mm (L) x 2,150 mm (H)

Back to Top

Scribing

Back to Top

Shaping

Back to Top

Cofining

Back to Top

Ni/Au Plating

Tape Masking Machine for Substrate Plating

Application
This is a machine for masking non-plated area on a printed board with a masking tape. The tape is automatically cut into a specified length and adhered at a predetermined location.

Features
This machine continuously cuts a tape with adhesives puts a cut tape on the surface precisely.

Specification
Substrate size: Approx. □300 mm and □500 mm
Cut tape: 5 mm x 17 mm x 0.18 mm thick PVC tape
Taping position: 8 positions/side x double side
Taping accuracy: Preset location ±0.5 mm (at double-side taping)

Overall size: 2,615 mm (W) x 1,480 mm (L) x 2,220 mm (H)
Weight: 950 kg

Back to Top

Filter Capacitor/ Balun Inductor

Back to Top

Others

Roll Coater & Oven for Substrates

Application
This is a full-automatic roll coater & oven used for multi-layer resist substrates. A substrate is taken out of a rack, transferred, roll-coated with resin, weighed, cured in the oven and fed into another rack.

Features
Roll profile and roll pressure are adjustable to secure uniform resin coating over a substrate. Thorough measures are taken to prevent particle problems and surface defects.

Specification
Coating speed: 1 m/min.±5%
Coating weight: Variable ±0.3 g/panel (Target)
Draft in oven: 2 m/sec. ±0.5
Oven temperature: Preset temp. ±2 ℃

Overall size: 2,550 mm (W) x 10,450 mm (L) x 2,530 mm (H)
Weight: 7,500 kg

Back to Top

Lead Frame Silver-alloy Brazing Machine

Application
This is a machine for automatically spot-blazing silver-alloy on lead frame.

Features
This machine automatically cuts a silver-alloy wire wound in coil to length, brazes at predetermined positions on a lead frame.

Specification
Work size 172±0.2 mm x 21.4±0.05 mm x 0.1 mm
No. of spot brazing 21 positions x 2 rows
Spot brazing space 8.0±0.03 mm x 20 = 160±0.02 mm
Size of silver-alloy 1.5 mm x 0.05 mm
Work size 172±0.2 mm x 21.4±0.05 mm x 0.1 mm
No. of spot brazing 14 positions x 1 row
Spot brazing space 12.0±0.03 mm x 13 = 1560±0.1 mm
Size of silver-alloy 1.5 mm x 0.05 mm
Capacity: 2,250 pieces/hr. (common to 1-row and 2-rows)
Accuracy: Spot brazing position ±0.1 mm
Silver-alloy cutting ±0.1 mm
Overall size: 1,200 mm (W) x 780 mm (L) x 1,230 mm (H)

Back to Top